To Next PageTo Next Page
Need help?Do you have a question about the Fluke endurance series and is the answer not in the manual?
General| Brand | Fluke |
|---|---|
| Model | endurance series |
| Category | Measuring Instruments |
| Language | English |
Details temperature ranges, spectral response, and response times.
Covers optical resolution, variable focus, and spot size.
Outlines power, output, input, RS485, and Ethernet specs.
Details ingress protection, temperature, humidity, shock, and EMC.
Defines emissivity and its impact on 1-color measurements.
Explains the principles behind 2-color temperature measurement.
Provides guidelines to minimize electrical interference.
Factors to consider for optimal sensor location.
Optimal distance based on optical lens focus.
Guidelines for placing sensor in 1-color mode.
Guidelines for placing sensor in 2-color mode.
Procedure for aligning and focusing the sensor on the target.
Details power supply and connector installation.
Describes trigger and analog input functionalities.
Covers relay and analog output configurations.
Overview of the sensor's user interface and buttons.
Allows adjustment of mode, units, and relay settings.
Configuration of slope, emissivity, gain, and hold functions.
Settings for RS485 and Ethernet communication.
Configuration of analog input and output modes and limits.
Configuration of signal smoothing and hold functions.
Technical details of the RS485 interface.
Guidelines for installing sensors in an RS485 network.
Connecting sensors to computers via USB/RS485 converter.
Connecting and addressing multiple sensors in a network.
Configuration of IP address, subnet mask, and gateway.
Configuring the PC's network adapter for communication.
Using ASCII commands for sensor configuration.
Lists common symptoms, causes, and solutions.
Explains system shutdown on error or failure.
List of ASCII commands and parameters.
