Fluke endurance series - Environmental Specifications

Endurance
®
Series
Users Manual, Rev. 2.0, Jun 2020
24
2.4 Environmental Specifications
Ingress Protection IP65 (IEC529) / NEMA 4 (with end cap screwed on)
Operating ambient temperature
Without cooling:
E2RL 0 to 60°C (32 to 140°F)
all other models 0 to 65°C (32 to 149°F)
With air cooling:
all models 0 to 120°C (32 to 248°F)
With water cooling:
all models 0 to 175°C (32 to 347°F)
Water cooled by ThermoJacket:
all models 0 to 315°C (32 to 600°F)
Internal case temperature
all models 10 to 72°C (50 to 162°F)
Storage temperature -20 to 70°C (-4 to 158°F)
Humidity 10% to 95% @ 22 to 43°C (72 to 109°F), non-condensing
Shock IEC 68-2-27 (5 G, 11 ms duration, 3 axes)
Vibration IEC 68-2-6 (2 G, 10 to 150 Hz, 3 axes)
EMC EN 61326-1:2013 industrial
Warm up Period 15 min.
Material
Housing Stainless steel (Mat.-No.: 1.4305, X8CrNiS18-9)
Weight
Sensor 1220 g (43 oz)
Mounting nut 62 g (2.2 oz)
Fixed mounting bracket 264 g (9.3 oz)
Air/Water cooled housing 1760 g (62 oz)