Endurance
®
Series
Users Manual, Rev. 2.0, Jun 2020
94
12.1.9 PoE Injector (E-POE)
The PoE injector allows you to power the sensor over the Ethernet connection.
Technical Data
PoE standard 802.3af
PoE output power 15.4 W
PoE ports 1
Ethernet 100Base TX
Power supply 100 to 240 VAC / 50 to 60 Hz, 19 W
Operating temperature 0 to 50°C (32 to 122°F)
Humidity 10 to 90%, non-condensing
Dimensions L x W x H 146 x 64 x 42 mm (5.7 x 2.5 x 1.6 in)
Figure 12-10: PoE Injector
To Next Page
Loading...
