Fluke endurance series - Ethernet Poe Cable (E-Ethxtcbxx); Table 12-5: Available Ethernet Poe Cables; Figure 12-3: Ethernet Poe Cable; Figure 12-4: Pin Assignment (Front View)

Accessories
Electrical Accessories
87
12
12.1.3 Ethernet PoE Cable (E-ETHxTCBxx)
The Ethernet PoE cable comes with a four-pin male M12 D-coded connector, assigned to the sensors rear female
M12 connector. The corresponding end of the Ethernet PoE cable is equipped with a general RJ45 snap-in
connector.
The LT version of the cable is PUR coated and withstands ambient temperatures up to 80°C (176°F).
The HT version is Teflon coated and withstands ambient temperatures up to 180°C (356°F).
Figure 12-3: Ethernet PoE Cable
Figure 12-4: Pin Assignment (Front View)
RJ45 Plug M12 Plug
Table 12-5: Available Ethernet PoE Cables
P/N
Length
Ambient Temperature
E-ETHLTCB
7.5 m (25 ft)
80°C (176°F)
E-ETHLTCB25
25 m (82 ft)
80°C (176°F)
E-ETHLTCB50
50 m (164 ft)
80°C (176°F)
E-ETHCB
7.5 m (25 ft)
180°C (356°F)
E-ETHCB10
10 m (33 ft)
180°C (356°F)
1
2
3
6
1
3
2
4