Options
LED Sighting (-D)
77
11.2 LED Sighting (-D)
The LED sighting allows fast and precise aiming of targets. The LED is specially aligned with the sensor’s lens to
provide accurate, non-parallax pinpointing of targets. The LED comes as a bright spot indicating the whole spot
area being measured.
Figure 11-2: LED Spot Size Indication
Note
To preserve LED longevity, the LED automatically turns off after approximately 10 minutes of constant use!
Avoid exposure to LED light! Eye damage can result.
Use extreme caution when operating!
Never look direct into the LED beam!
Never point directly at another person!
With the LED activated, avoid looking through the visual sighting port of the control panel.
Mirror and dispersion effects can injure eyes.
11.3 Video Sighting (-V)
The video sighting capability is an option to display the target area via digital communication on an external
computer screen. The video of the internal camera is MJPEG coded and transmitted via an http protocol as a
network data stream. Two video formats are supported:
• VGA (640 x 480), aspect ratio = 4:3, frame rate ~ 60 fps
• 720p (1280 x 720), aspect ratio = 16:9, frame rate ~ 30 fps
LED dot identical to the
measured spot
To Next Page
Loading...
