Fluke endurance series - 12-Pin Plug (E-2 CCON); Modline 5 Patch Cable (E-M5 PK); Figure 12-11: 12-Pin Plug; Figure 12-12: Modline 5 Patch Cable

Accessories
Electrical Accessories
95
12
12.1.10 12-Pin Plug (E-2CCON)
The 12-pin plug is a female spare connector to replace a damaged one for the 12-wire cable, see section
12.1.1 High Temp 12-Wire Cable (E-2CCBxx), page 83 and section 12.1.2 Low Temp 12-Wire Cable (E-
2CLTCBxx), page 85.
In case of shortening the existing 12-wire cable, you can assemble the spare connector by your own experienced
technician.
Figure 12-11: 12-Pin Plug
12.1.11 Modline 5 Patch Cable (E-M5PK)
In case of replacing an existing Modline 5 device by an Endurance sensor, the already existing cabling is reusable
by inserting the Modline 5 patch cable. The cable connects the different types of plugs together.
Figure 12-12: Modline 5 Patch Cable