Flyer Mountain - Page 80

78
• Check that the handlebars, stem, seat post
and seat are safely attached and correctly
positioned
• Check the battery's charge status
• Check that the battery is correctly and secure-
ly attached.
Aftereachride–FLYERrider
• Cleaning the FLYER e-bike
• Visual inspection of the frame and of
components for cracks and damage
• Check the tyres for damage, wear, brittleness,
foreignobjectsandsu󰀩cientproledepth
• Check the rims for wear and
true running
• Check the tension of the spokes
• Clean the chain and sprockets as required
and lubricate them with a suitable chain oil
approved by the manufacturerIf necessary,
clean the brake discs with a
suitable brake cleaner approved by the
manufacturer
• Clean all bearings as required and lubricate
them with suitable lubricant approved by the
manufacturer
• Clean suspension elements as required and
lubricate them with original lubricant approved
by the suspension element manufacturer
• Clean all moving parts for which lubrication is
intended (especially quick-release fasteners,
quick-release axles and joints) as required
and lubricate them with a suitable lubricant ap-
proved by the manufacturer
Allow your FLYER specialist retailer to instruct
you.
What to do after riding in rain, snow or wet
conditions:
(in addition to the points under “After each ride”)
FLYER rider
• Clean the chain and lubricate it with a suitable
lubricant approved by the manufacturer
• Clean the brake
• Clean the gear system
• Check that all componentsaresu󰀩ciently lu-
bricated
Allow your FLYER specialist retailer to instruct
you.
Monthly–FLYERrider
Checkthermattachmentofallscrews,nutsand
quick-release fasteners
Everyyearorafterevery1000km,whichever
occursrst
FLYER specialist retailer
• Lubrication of all moving parts for
which lubrication is intended
(excludingbrakesurfaces)
• Visual inspection of the frame and of
components for cracks and damage
• Mend paint damage
• Replace parts with rust spots
• Treatallbaremetalparts(excludingbrake
surfaces) against corrosion (rust)
• Change defective or damaged parts
• Check the wheels and centre them as
required
• Check the tension of the spokes
• Check and clean the
chain/sprocket/cogset
• Lubricate the chain with a suitable lubricant
• Check the rim for wear
• Check the brake pads for wear
• Check that all screws, nuts, quick-release
axlesandquick-releasefastenersarermly
attached
• Check the brake system and quick-release
axlesandadjustthemorreplacepartsifnec-
essary
• Check the gear system and adjust or replace
parts of it if necessary
• Check the hubs
• Check the headset
• Check the pedals
Only use cleaning agents and lubricants
that are recommended or approved by
the component manufacturer.
Please note that not all lubricants and
care products are suitable for your
FLYER. By using unsuitable lubricants
or care products, you can damage or im-
pact the functionality of your FLYER
e-bike.
Ensure that the brake pads, brake discs
and brake surfaces on the rims are not
exposedtocleaningorservicinguidsor
oils, as this reduces the performance of
the brakes.