Flyer Mountain - Gears, Chain, and Belt Drive

68
Enviolo
To access the instructions for the Enviolo TR
AutomatiQ integrated hub gears, visit https://sup-
port.enviolo.com or scan the following QR code:
Forinstructions onhowto congurethe Enviolo
TR AutomatiQ integrated hub gears in the display
D1, see section 5.5.17 “Enviolo automatiQ integ-
rated” in this guide.
Despite a perfectly set up derailleur gear
system, a bike chain crossing at an an-
gle can lead to noises during riding.
These noises are normal and do not
cause any damage to the gear compo-
nents.
Do not pedal backwards while changing
gears, as this may damage the gear sys-
tem.
Using faulty, incorrectly set-up or worn
gear components is dangerous and can
lead to falls. If you are concerned, have
components checked and readjusted as
required by a FLYER specialist retailer.
Electronic gears
Youmayndelectronicgearsinparticu-
lar unfamiliar to operate. Therefore, you
may want to ask your FLYER specialist
retailer for more information and about
this.
When you use the multishift function,
your electronic shifting system shifts very
rapidlytolowgears.Thissignicantlyre-
duces the pedalling resistance, which
can cause you to lose your balance and
fall. You should take particular care when
shifting down gears. While riding, make
sure that you do not accidentally hold
down the “–” button/rocker switch on the
operating element/button. Do not rest
your ngers on the buttons/rocker
switches while riding. Sudden and acci-
dental shifting down (“–” button/rocker
switch) to a low gear can cause you to
lose control of the bike.
16. Bicyclechainand
sprocket,belt
drive
Bicyclechainmaintenance
Bicycle chains are subject to wear depending on
how they are used. The degree of wear varies
considerably. Have the chain of your FLYER reg-
ularly checked by your FLYER specialist retailer.
• Hubgears:approx.3000km
• Derailleurgears:approx.1500–2000km
A worn bike chain can break and cause
very serious falls. Worn bicycle chains
must therefore immediately be changed
by your FLYER specialist retailer.
Regularly care for your bicycle chain by cleaning
and greasing it. These measures reduce prema-
ture wear.
To ensure that the chain and gears can
work safely, the chain must have a cer-
tain level of tension. Derailleur gears
tension the chain automatically. In the
case of hub gears, chains which are too
loose must be tightened. It might other-
wisejumpo󰀨thegearsandleadtoafall.
Chain OK
Chain worn