Focus IMPULSE EVO PEDELEC - Page 73

Original User Guide | Impulse Evo pedelec Version 2 US-73
7.3.1 Display panel
On the outside of the battery there is a
display panel with 5 LEDs and a battery
button. Three of the LEDs have percentage
values. The LEDs light up when you press
the battery button. The number and way
they light up tell you about the battery
status.
Battery button
7.3.1.1 Battery charge level
1. Press the battery button for one second. The LEDs light up.
Display Description Battery charge level
100%

5 LEDs on 84 – 100 %

4 LEDs on 68 – 83 %
50%

3 LEDs on 51 – 67 %

2 LEDs on 34– 50 %
0%

1 LED on 17 – 33 %
0%
1LEDashing 0 – 17 %
7.3.1.2 Capacity
Capacity indicates the quantity of electric charge that a
battery can deliver or store. It is given in ampere hours
(Ah). Even when used properly, capacity diminishes over
time due to chemical reactions (aging). So it reduces with
every charging cycle. A battery also ages slightly when it is
not used.
A charging cycle is the complete charging of a battery from
0 to 100% capacity. It follows that not every charging
process equates to a charging cycle. For example, a charge
from 50 to 100% capacity is only half a charging cycle.
1. Pressthebatterybuttonforveseconds.Thecapacityofthebattery
will be displayed.
Display Description Battery charge level
100%

At least 4 LEDs on The battery has a capacity of over 68%
<50%

0 - 2 LEDs on The battery charge is below 50%
If fewer than three LEDs come on, the battery may need to
be replaced. To discuss the next steps speak to your dealer.