•
Prise out the fog lamp bezel at its
base, slide the bezel downwards
and remove it.
•
Loosen the screws and pull out
the lamp assembly.
•
Disconnect the wiring connector.
•
Remove the bulb and replace it.
Install in the reverse order.
Vehicles with a body styling kit
Insert your fingers into the hole in the
bezel above the fog lamp and pull off
the complete bezel.
Front fog lamps (Type 2)
H8, 35 watt halogen bulb
1. Prise out the fog lamp bezel at its
base, slide the bezel downwards
and remove it.
2. Loosen the screws and pull out
the lamp assembly.
3. Disconnect the wiring connector.
4. Remove the bulb and replace it.
79
Lighting
To Next Page
Loading...
