Formulatrix MANTIS - Opening the Chip Dispense History

96
MANTIS User's Guide | Chapter 11: MANTIS Radio-Frequency Identification (RFID)
The following basic information is stored on each RFID chip itself:
After each dispense using an RFID chip, the following information will be stored directly
onto your MANTIS database, tagged to the serial number of that chip.
Option Description
Chip Type E.g. High Volume, Low Volume, PFE, or Continuous
Flow.
Total Volume Dispensed Total volume that this chip has dispensed to date.
Small Diaphragm Cycle Total number of Small Diaphragm cycles to date.
Large Diaphragm Cycle Total number of Large Diaphragm cycles to date.
Date of Manufacture This chip’s manufacturing date.
Chip Serial Number This chip's unique ID.
Option Description
Dispense Date Dispensing process date.
Protocol Name Name of the protocol used for the dispensing process.
Dispense List Name Name of the dispense list used for the dispensing process.
Plate Type Plate type used for the dispensing process.
Reagent Name Name of the reagent used during the dispensing process.
Chip Position Number Chip station number in the Chip Changer or LC3 Carousel.
Input Type Input source type, such as tube or pipette.
Total Volume Dispensed Total volume that this chip has dispensed to date.
Small Diaphragm Cycle Total number of Small Diaphragm cycles to date.
Large Diaphragm Cycle Total number of Large Diaphragm cycles to date.
Fill Cycle Total number of Fill Diaphragm cycles to date.
Output Cycle Total number of Output Diaphragm cycles to date.
Dispense Status Status of a dispensing process, whether it is finished or
interrupted.
Dispense History