Items Description
Chips (Low Volume Chips, High
Volume Chips, Low Volume
PFE Chips, High Volume PFE
Chips, High Volume CF Chips,
Low Volume Molecular Grade
chips, High Volume Molecular
Grade Chips)
Four extra nozzles and tube adapters are included in the package. High Volume
chips are indicated by a green input.
Chips with RFID tags
Chips with Radio-Frequency Identification (RFID) tags store chips' information and
dispense history. These are only available for MANTIS with RFID option.
Chip Pallets
The chip pallets enable microfluidic chip replacement. Compatible with both low
volume and high volume chips.
MANTIS Chip Changers The MANTIS chip changers are used to hold chip pallets when not in use.
Extra Nozzles (LV And HV
Nozzles)
The MANTIS nozzle is installed in the chip.
Abrasion-Resistant Teflon Input
Tubing – Green (for High
Volume Chips) and Clear (for
Low Volume Chips)
The tubing is used for connecting ingredient(s) from its source to the chip(s).
Reference Plate
The reference plate is a clear plate that has crosshairs located at each corner. The
crosshairs are targets for you to use if you need to tune drop position. The MANTIS
software then determines the remaining drop positions from these four points.
Ball Point Hex Keys
Also known as Allen wrenches, ball point hex keys are included for troubleshooting
purposes.
Power Cable
The power cable is approximately 6 feet long, and is used to conduct power to your
MANTIS from the power supply adapter.
Accessories
Appendix A
MANTIS User's Guide | Accessories
To Next Page
Loading...