ü Read all safety and operating instructions before operating the MANTIS.
ü Do not place the MANTIS connections (power, waste lines, and communications
cables) where they could cause a safety hazard.
ü Do not place the product in a location where it may be subject to physical damage.
ü Ensure that all power connections to the product are properly grounded.
ü Do not remove the nameplate, or any warning, hazard, or Equipment Identification
labels.
ü Turn OFF power before inserting or removing power cables.
The MANTIS is a complex electromechanical instrument. Only persons with the proper
training should service or operate the product.
All facilities to the product must be disconnected before servicing, or injury may result
from the automatic operation of the equipment.
The proper precautions for operating electrical equipment must be observed.
Equipment Safety Guidelines
Mechanical Hazards
Electrical Hazards
Avoid damage to the power cables. Do not apply unnecessary stress, place heavy objects
on, or crush the cables or fire may occur.
Do not use extension cables unless approved by FORMULATRIX.
Switch off all power sources before removing connectors or electric shock may occur.
Arrange cables in accordance with the Technical Standard for Electric Properties and
Extension Rules or fire may occur.
MANTIS User's Guide | Chapter 2: Safety Information
To Next Page
Loading...