Accessories
Article: Item number: Designation:
48,0005,2582 Stainless steel drive wheel
(for workpieces with particu-
larly rough surfaces).
IMPORTANT! Use of the carriage with the "stainless steel drive wheel" accessory is
only permitted in the PA welding position. Please seek advice with Fronius service per-
sonnel if using pre-heated workpieces.
48,0005,2583 Brushes (2 pcs)
48,0005,2600 Rechargeable battery pack
25.4 V / 6.8 Ah
48,0005,2601 Charger
100-240 V 50/60 Hz /
29.4 V DC
48,0005,0165 External power supply
230V AC / 24V DC
38,0100,0433 Remote control cable 10 m
38,0100,0476 Extension cable 10 m
4,100,711 I-set external start signal
VR5000
(necessary for use with TransSteel;
installed in the wirefeeder)
Accessories and options
14
To Next Page
Loading...
