Fronius ArcRover 22 - Setting Oscillation Parameters; Adjusting Oscillation Speed and Path

Setting the
oscillation
parameters
Slot 0
CAR
OSC
50%
Slot 0
CAR
OSC
50%
Slot 0
CAR
OSC
025
025
Slot 0
CAR
OSC
025
025
1. Press the adjusting dial once; the
menu selection is activated.
Press
Press
Press
2. Turn adjusting dial menu and highlight
the OSC menu item.
Turn
3. Press the menu adjusting dial once;
the highlighted OSC menu opens.
IMPORTANT! The most recently used
parameter will always be displayed
when the menu is opened. Turn the
menu adjusting dial left to display the
rst parameter (Oscillation Speed).
4. Press the menu adjusting dial once.
The adjustment value (50%) is high-
lighted in white and can be changed.
Slot 0
CAR
OSC
60%
Turn
5. Turn the menu adjusting dial and set
the desired value (e.g. 60%).
47