Fronius ArcRover 22 - Setting Oscillation Dwell Time and Mode

Slot 0
CAR
OSC
60%
Press
Setting the
oscillation
parameters
(continued)
6. Press the menu adjusting dial once;
value takes e󰀨ect and the input is
deactivated.
Slot 0
CAR
OSC
30%
Slot 0
CAR
OSC
1,5s
Slot 0
CAR
OSC
1.5s
Slot 0
CAR
OSC
Triangle
Slot 0
CAR
OSC
1.5s
7. Turn the menu adjusting dial to select and set the next parameter (Oscillation Path).
8. Repeat this process on all further oscillation parameters.
Oscillation Path
Dwell time Middle
Oscillation Mode
Dwell time Left
Dwell time Right
Slot 0
CAR
OSC
025
025
Press
9. Press the FMS-O󰀨set adjusting dial
once to return to the main menu.
48