Fronius ArcRover 22 - Adjusting Travel Speed and Total Path

1. Press the adjusting dial once; the
menu selection is activated.
2. Press the menu adjusting dial once;
the highlighted CAR menu opens.
IMPORTANT! The most recently used
parameter will always be displayed
when the menu is opened. Turn the
menu adjusting dial left to display the
rst parameter (Travel Speed).
3. Press the menu adjusting dial once.
The adjustment value (40 cm/min) is
highlighted white and can be changed.
CAR
OSC
000
000
Slot 0
Press
Press
Press
Turn
Press
Setting the
carriage
parameters
Slot 0
CAR
OSC
40cm/min
Slot 0
CAR
OSC
40cm/min
Slot 0
CAR
OSC
25cm/min
Slot 0
CAR
OSC
25cm/min
4. Turn the menu adjusting dial and set
the desired value (e.g. 25 cm/min).
5. Press the menu adjusting dial once;
value takes e󰀨ect and the input is
deactivated.
45