Fronius ArcRover 22 - Setting Segment and Gap Parameters

6. Turn the menu adjusting dial to select and set the next parameter (Total Path).
7. Repeat this process on all further carriage parameters.
Slot 0
CAR
OSC
0cm
Slot 0
CAR
OSC
0cm
Slot 0
CAR
OSC
0.0s
Slot 0
CAR
OSC
0.0s
Slot 0
CAR
OSC
0cm
Slot 0
CAR
OSC
0.0s
Slot 0
CAR
OSC
O
Setting the
carriage
parameters
(continued)
Total Path Segment Width
Segment Gap
Back Filling
Change direction / Stop
End Crater Filling
Start Delay / Flying Start
Slot 0
CAR
OSC
025
025
8. Press the FMS-O󰀨set adjusting dial
once to return to the main menu.
Press
46