Fronius ArcRover 22 - Carriage and Oscillation Unit Data; Motor Slide Specifications

ArcRover 22
carriage
(continued)
Oscillation
unit FOU 30/
ML6
Horizontal speed (load = 85 N) 5 - 200 cm/min (+/- 6%)
Vertical speed (load = 85 N) 5 - 200 cm/min (+/- 6%)
Adjustable range of torch (horizontal/vertical) 30 mm / 30 mm (1.18 in / 1.18 in.)
Welding torch body diameter max. 28 mm (1.1 in.)
Minimal material thickness 5 mm (0.2 in.)
Clearance 6 mm (0.24 in.)
Max. preheating temperature of the workpiece 150 °C (302 °F)
Max. load capacity 15 kg (33.06 lb)
Control voltage 24 VDC
Power consumption 8 W
Traversing speed (automatic mode) 30 cm/min (11.8 in/min)
Traversing speed (manual mode) max. 1 m/min (39.37 in/min)
Travel path 0.5 - 100 mm (0.02 - 3.94 in.)
Degrees of sensitivity 1 - 9
Dwell time 1 - 60 s
Degree of protection IP 23
Unladen weight 2.45 kg (5.40 lb)
IMPORTANT! The ACC module may only be used with the TPS power source.
Max. load capacity 15 kg (33.06 lb)
Control voltage 24 VDC
Power consumption 8 W
Traversing speed (automatic mode) 30 cm/min (11.8 in/min)
Traversing speed (manual mode) max. 1 m/min (39.37 in/min)
Travel path max. 50 mm (1.97 in.)
Degrees of sensitivity 1 - 9
Dwell time 1 - 60 s
Degree of protection IP 23
Unladen weight 2 kg (4.40 lb)
IMPORTANT! The ACC module may only be used with the TPS power source.
FMS 100/ML15/
SE/ACC
(optional)
FMS 50/ML15/
SE/ACC
(optional)
Oscillation Speed (at 150 mm radius) 20 - 120 cm/min (7.78 - 47.24 in.)
Oscillation Path (at 150 mm radius) 1 - 30 mm (0.04 - 1.18 in.)
O󰀨set 0 - 50 mm (0 - 1.97 in.)
Dwell time 0 - 3 seconds
Weight (with torch holder) 3.6 kg (7.94 lb)
Protection class IP 23
66