Lateral guide with guide rail
The exible lateral rail is secured using magnetic bases. Each rail (1850 mm) requires 10
magnetic bases to guarantee a secure hold.
The rail sections can be attached to the magnetic bases in the following ways:
- Placed end-on
- Overlapping
Attach the rails to the magnet block with the provided M5x16 xing screws.
End-on join Overlapping join
When placed on a 5 mm thick magnetic surface, the mag-
netic bases have the following holding force:
- Up to a temperature of 100 °C (212 °F): 90 N
- From a temperature of 180 °C (356 °F): 54 N
M5x16
Fitting the lateral
guides
(option)
(continued)
34
To Next Page
Loading...
