Fronius Primo Series User Manual

34
Display range General/Country Setup/MPP Tracker/AC Monitoring/AC Volt-
age Limits/AC Frequency Limits/Q-Mode/AC Power Limits/AC
Voltage Derating / Fault Ride Through
General: Device type
Fam.
Country Setup: Setup
Country setup used
Version
Country setup version
Group
Inverter software update group
MPP Tracker: Tracker 1 (status, voltage)
Tracker 2 (status, voltage)
AC Monitoring: GMTi
Startup time of the inverter in s
GMTr
Restart time in s after a grid error
ULL
Grid voltage average value over 10 minutes in V.
LLTrip
Detection time for long-term voltage monitoring
AC Voltage Limits: UILmax
Upper inner grid voltage value in V
UILmin
Lower inner grid voltage value in V
UOLmax
Upper outer grid voltage value in V
UOLmin
Lower outer grid voltage value in V
AC Frequency Limits: FILmax
Upper inner grid frequency value in Hz
FILmin
Lower inner grid frequency value in Hz
FOLmax
Upper outer grid frequency value in Hz
FOLmin
Lower outer grid frequency value in Hz
Q-Mode: Currently set power factor (cos phi)
(e.g., Constant Cos(phi)/Constant Q/Q(U) characteristic/etc.)
AC Power Limits: Max. P AC
Manual power reduction

Fronius Primo Series Specifications

General

Efficiency	Up to 98.1%
Protection Rating	IP65
Operating Temperature Range	-25°C to +60°C
Frequency	50 / 60 Hz
DC input voltage range	80 - 600 V
Model	Primo Series
Type	Transformerless
Power Classes	3.0 kW to 8.2 kW
Communication Interfaces	WLAN, Ethernet, RS485
Weight	21.5 kg
Max. apparent AC power	8, 200 VA
AC voltage range	150 - 280 V
MPP voltage range	240 - 480 V
Warranty	5 years
Dimensions	645 x 431 x 204 mm