Fronius Primo Series User Manual

36
Switching the key lock on and off
General The inverter comes equipped with a ‘Key lock’ function.
When the ‘Keylock’ function is active, the Setup menu cannot be accessed, e.g., to protect
against setup data being changed by accident.
You must enter code 12321 to activate / deactivate the ‘Key lock’ function.
Switching the Key
Lock On and Off
Press the "Menu" key.
The menu level is displayed.
Press the unassigned "Menu / Esc"
key
5 x.
In the "CODE" menu, the "Access Code"
is displayed; the first digit flashes.
Enter code 12321: Use the "Up" and
"Down" keys to select a value for the
first digit of the code.
Press the "Enter" key.
The second digit flashes.
Repeat steps 3 and 4 for the second,
third, fourth and fifth digit in the code
until...
...the set code flashes.
Press the "Enter" key.
In the "LOCK" menu, the "Key lock" func-
tion is displayed.
Use the "Up" and "Down" keys to
switch the key lock on or off:
ON = the key lock function is activat-
ed (the SETUP menu item cannot be
accessed)
OFF = the key lock function is deac-
tivated (the SETUP menu item can be
accessed).
Press the "Enter" key.
1
2
3
4
5
6
7
8

Fronius Primo Series Specifications

General

Efficiency	Up to 98.1%
Protection Rating	IP65
Operating Temperature Range	-25°C to +60°C
Frequency	50 / 60 Hz
DC input voltage range	80 - 600 V
Model	Primo Series
Type	Transformerless
Power Classes	3.0 kW to 8.2 kW
Communication Interfaces	WLAN, Ethernet, RS485
Weight	21.5 kg
Max. apparent AC power	8, 200 VA
AC voltage range	150 - 280 V
MPP voltage range	240 - 480 V
Warranty	5 years
Dimensions	645 x 431 x 204 mm