Day Setting 1-5:
The day settings allow up to five differ-
ent charging start time profiles to be
defined with the following settings:
-
Symbol for characteristic 1:
Time window in which charging is
to be started using characteristic 1
(e.g.: 00:00-06:00)
-
Stop:
Time window in which charging
must not take place (e.g.:
06:00-20:00)
-
Symbol for characteristic 1:
Time window in which charging is
to be started using characteristic 1
(e.g.: 20:00-24:00)
NOTE!
Ongoing charging operations are unaffected by the set time windows.
▶
If, in the example above, a battery is connected at 05:45, the charge end
time is governed according to need and is not interrupted by the end time
specified for the set time window (06:00 in the example).
▶
If the battery is connected during the "stop" time window, charging is started
automatically during the next time window. If charging is started manually
during the "stop" time window, charging will always take place using charac-
teristic 1.
Additional settings:
-
Change the allocated characterist-
ic:
characteristics symbol.
-
Remove the selected characterist-
ic:
"remove".
Week Setting:
-
Three different week settings can
be defined.
A previously created day setting can be
assigned to any day of the week.
42
To Next Page
Loading...
