Settings Below is a detailed description of the "Settings" menu item for the "Charging set-
tings" menu item discussed above. Navigation is performed as described in the
"Configuration mode" section.
A list appears with the following selection options:
The individual selection options are explained in greater detail below.
Electrolyte cir-
culation
"Air Pump" electrolyte circulation (not
available on the Selectiva 220 V vari-
ant):
The electrolyte circulation cycle is
controlled by the charger's control
system. A number of selection options
are available for this purpose.
The following settings are available for electrolyte circulation:
Off
-
Electrolyte circulation switched off.
Continuous operation (“continuous”)
-
Electrolyte circulation permanently on.
Program 1 to 5
-
Default electrolyte circulation programs and their relevant parameters can
be found in the table under "Settings" in the "Display" chapter.
Automatic
-
Automatic adjustment of the electrolyte circulation flow rate based on the
set battery parameters.
User - “On”/”Off”
-
Individual setting of the electrolyte circulation.
-
The settings for "On" and "Off" determine the pulse/pause ratio of the air
flow intervals.
Default electrolyte circulation programs and their relevant parameters can be
found in the table below:
38
To Next Page
Loading...
Need help?
General
