Description of the control panels
General The key feature of the control panel is the logical way in which the control ele-
ments are arranged. All the main welding parameters needed for day-to-day
working can easily be:
-
selected using the buttons
-
altered with the adjusting dial
-
shown during welding on the digital display.
NOTE!
Due to software updates, you may find that your device has certain functions
that are not described in these operating instructions or vice versa.
Individual illustrations may also differ slightly from the actual controls on your
device, but these controls function in exactly the same way.
Safety
WARNING!
Danger from incorrect operation.
Possible serious injury and damage to property.
▶
Do not use the functions described here until you have read and completely
understood these Operating Instructions.
▶
Do not use the functions described here until you have fully read and under-
stood all of the Operating Instructions for the system components, in partic-
ular the safety rules!
27
EN
To Next Page
Loading...
Need help?
General
