Fronius TransTig 1700 User Manual

2
Actuate the torch trigger
Shielding gas flows.
3
Gradually tilt the welding torch up
until the tungsten electrode
touches the workpiece
4
Raise the welding torch and move
it into its normal position
The arc ignites.
5
Carry out welding
End of welding
1
Depending on the set mode, finish welding by releasing the torch trigger
2
Wait for the set gas post-flow and hold welding torch in position over the end
of the weld seam
66

Fronius TransTig 1700 Specifications

General

Brand	Fronius
Model	TransTig 1700
Category	Welding System
Language	English