The Setup menu
General The set-up menu provides easy access to the knowledge base in the power source
and to additional functions. The set-up menu can be used to make simple adjust-
ments of the welding parameters to suit the various job settings.
The following can be found in the set-up menu:
-
Set-up parameters that have an immediate effect on the welding process
-
Set-up parameters needed for making the preliminary settings on the weld-
ing system
The welding parameters are arranged in logical groups. Each of these groups is
called up by pressing a different combination of buttons.
Overview "The Set-up menu" is composed of the following sections:
-
Protective gas shield set-up menu
-
TIG set-up menu
-
Rod electrode set-up menu
-
Rod electrode set-up menu level 2
75
EN
To Next Page
Loading...
