Fronius TransTig 1700 User Manual

Special 4-step
mode:
variant 4
Variant 4 of the special 4-step mode is activated when the SFS set-up parameter
is set to "4".
-
Welding start-up and welding: briefly pull back and release the torch trigger -
the welding current will rise at the specified upslope value from the starting
current I
S
until it reaches the main current value I
1
.
-
Push forward and hold the torch trigger for intermediate lowering
-
Release the torch trigger to resume the main current I
1
-
End of welding: briefly pull back and release the torch trigger
I
t
I
1
GPr
I
S
t
down
I
E
G-L
G-H
I
1
I
2
t
up
t
E
t
S
Special 4-step mode: variant 4
59
EN

Fronius TransTig 1700 Specifications

General

Brand	Fronius
Model	TransTig 1700
Category	Welding System
Language	English