Frymaster 3000 Training Manual

3000 CONTROLLER USER GUIDE
3
Quick Reference: Using the 3000
Use to scroll through
menu, programming
options.
Press together
to launch POLISH.
Exits COOL
mode.
Heats oil
back to
setpoint.
Check
actual,
setpoint
temps &
software
version.
Press to scroll through
menu & programming
options.
Press together to
change to 2nd
language.
Enter
codes,
respond
to left-
display
prompts.
Access
FILTER
prompts.
Product Button LED: Lit when button is active. All
buttons with a common setpoint light simultaneously.
2
7
8
9
10
6
6
5
5
3
3
1
4
11
1
12
Menu strip slot
(access behind
bezel):
insert
customized
product names
2
MENU
STRIP
Blue buttons cook White buttons cook
Left Side Right Side
1.
On/Off
Turn controller(s) on/off; exit filter/polish cycles.
2.
Display screens.
Written information prompts.
3.
Product buttons
- Blue cook
left display
- White cook
right display
Press to start, complete, or cancel (press and hold) a product cook. To change
to another setpoint temperature, press, hold, then release desired non-lit button.
When lit, push again to start cook at alternate setpoint temperature. In scan
mode, press to view product setup.
4.
Product Button
LEDs
Lights for products that cook at setpoint. Flash during cook cycle.
5.
Left/Right Scroll
Navigate options in left display window. Press both simultaneously to launch
polish cycle.
6.
Up/Down Scroll
Navigate options in right display window. Press both simultaneously to change to
a second language.
7.
Exit Cool
Press and release to exit COOL mode. Heats oil back to setpoint. Press and
hold to cancel melt cycle.
8.
Thermometer
With controller on, shows setpoint in left display & vat temp on the right. (Toggles
for split pot). When off, shows setpoint, time, type of fryer, and software version.
If press and hold when on, displays AIF- - - -ATO - - - -. If press and hold when
off, displays AIF- - - -ATO - - - - . These displays are for service only to help
identify probe performance issues.
9.
Checkmark
With controller on or off, press and release to get recovery time (Normal for
Electric is 1:40 or less & Gas is 2:25 or less). With controller off, press and hold
for 4-5 seconds for info mode functions, or 10 seconds for main menu:
programming functions.
10.
Filter
With controller off or on, press for cooks remaining in filter cycle. Press and hold
to access filter menus (filter, clean and filter, dispose). (Fill vat from bulk option
will also display on Bulk Oil models.) With frypot off, press and hold to access
dispose & boil out.
11.
Exit/Scan
Press to view product set ups or to exit main menu programming functions.
12.
Menu Strip
Remove bezel to access customizable menu strip.
Cooking
1. Press ON/OFF
1
: Display screens
2
show system information and oil heats to setpoint.
2. DROP: Oil is at set temperature. Press any lighted product button
3
and drop product.
3. Other possible cooking display prompts:
- ** Temperature is outside the normal cooking temperature range but controller will adjust cook
time accordingly, so cook can be started without affecting food quality. DROP will display when
temperature is back in the normal cooking range.
- High Temp – Temperature is higher than normal variation.
- Low Temp – Temperature is lower than normal variation.

Frymaster 3000 Specifications

General

Brand	Frymaster
Model	3000
Category	Controller
Language	English