Frymaster 3000 - 3000 Version 3 Controller Instructions; Using the 3000 Version 3

3000 CONTROLLER USER GUIDE
4
4. SHAKE: If shake is needed, alarm sounds.
5. DONE: Audible alarm sounds. Press blinking product button
3
to cancel alarm and remove product.
NOTE: To cancel cook at any time: Press and hold blinking product button
3
.
COOL MODE deactivation
1. Press ON/OFF
1
: Oil heats to setpoint temperature.
2. COOL: After the programmed idle time, controller reverts to idle temperature and displays COOL. With
full frypots only, press at any time to reduce frypot’s temperature to COOL mode. Default is 250°F
(121°C). The COOL mode temperature can be adjusted. See MAIN MENU: VAT SETUP
3. Press EXIT COOL to return oil to setpoint temperature.
NOTE: COOL MODE can be activated on full frypots only at any time by pressing EXIT/COOL.
Polish (Controller must be ON)
1. To polish, press and hold simultaneously.
2. Controller displays
2
“POLISH NOW” alternating with “YES” and “NO”.
3. Select YES (button under YES display
5
) to launch polish cycle or NO to continue cooking.
4. Follow prompts for step by step polish guidance.
5. Controller turns off when polish cycle is complete.
Filter (Controller must be ON to record filter events and to display step by step filter prompts)
1. To filter, press and hold FILTER
10
. NOTE: Only one frypot can be filtered at a time; if filter is selected
on a second frypot “WAIT TO FILTER” will scroll until prior frypot filtration is completed.
2. Select desired filter function (filter, clean and filter, or dispose). (Fill vat from BULK will also display on
Bulk Oil models.)
3. Controller displays
2
“FILTER NOW” alternating with “YES” and “NO”.
4. Select YES (press button under YES display
5
) to launch filter cycle.
5. Select NO (press button under NO display
5
) to delay filter and cooking continues. Press NO two times
and filter count resets.
6. Follow prompts for step by step filter guidance.
7. Controller turns off when filter cycle is complete.
Filter (All filter functions can be performed with the fryer off. However, the fryer will not record them
as completed.)
NOTE: Controller must be OFF to access BOIL OUT filter function.
NOTE: Blue product button products will cook in the left display(s). White product button products will
cook in the right display(s).
Product Setup
Left Display
Right Display
Action
OFF
OFF
1. Press/hold about 10 seconds until PRODUCT SETUP is displayed.
MAIN MENU will flash before displaying PRODUCT SETUP.
PRODUCT
SETUP
[BLANK]
2. Press to program menu items and cooking parameters.
PRODUCT
SETUP
ENTER CODE
3. Enter 1650.
SELECT
PRODUCT
[BLANK]
4. Press desired product button.
LONG NAME
PRODUCT
NAME OR
BUTTON
NUMBER
5. Enter 8 character product name with text keys. Move cursor from letter
to letter with forward one letter or back one letter. This name
will alternate in the display window with the cook time during a cook (full
frypot).
6. Press to advance to next product set up feature or to move
back one product set up feature.
SHORT NAME
ABBREVIATED
PRODUCT
NAME OR
BUTTON
7. Enter abbreviated 4-character product name with the text keys. This
name will alternate in the display window with the cook time during a
cook (split frypot).