1-5
1.10 Reading Model Numbers
1.11 Parts Ordering and Service Information
In order to assist you quickly, the Frymaster Factory Authorized Servicer (FAS) or Service
Department representative requires certain information about your equipment. Most of this
information is printed on a data plate affixed to the inside of the fryer door. Part numbers are
found in the Parts Manual. Parts orders may be placed directly with your local FAS or
distributor. A list of Frymaster Factory Authorized Servicers (FAS’s) is located on the Frymaster
website at www.frymaster.com/service. If you do not have access to this list, contact the
Frymaster Service Department at 1-800-551-8633 or 1-318-865-1711 or by e-mail:
fryservice@welbilt.com.
Service information may be obtained by contacting your local FAS/Distributor. Service may
also be obtained by calling the Frymaster Service Department at 1-800-551-8633 or 1-318-865-
1711 or by e-mail: service@frymaster.com. When requesting parts or service, please have the
following information ready:
Model Number:
Serial Number:
Type of Gas and
voltage:
Item Part Number:
Quantity Needed:
In addition to the model number, serial number, and type of gas, please be prepared to
describe the nature of the problem and have ready any other information that you think may
be helpful in solving your problem.
RETAIN AND STORE THIS MANUAL IN A SAFE PLACE FOR FUTURE USE.
To Next Page
Loading...
