Frymaster FPGL330CA - Page 101

2-34
2.15 Fasteners cont.
ITEM PART # COMPONENT
* 809-0500 Screw, 10 x ½-inch Hex Washer Head 410 SS
*
809-0434 Screw, 10 x ⅜-inch Hex Washer Head NP
* 809-0123 Screw, 10 x ¾-inch Slot Head
* 826-1389 Screw, ¼-20 x ¾-inch Hex Head ZP (Pkg. of 10) (809-0131)
* 826-1346 Spacer, Ignition Module (Pkg. of 10)
* 810-2763 Spacer, Interface Board
* 826-1340 Spacer, .25-inch x 1.187-inch (Pkg. of 10)
* 810-0500 Spacer, .25-inch x .9375-inch
810-2023 Spacer, .25-inch x .110-inch (Used on drain valves.)
* 200-6721 Plate, Strain Relief
* 826-1337 Tab, ¼-inch Terminal (Pkg. of 5)
* 807-0070 Terminal, Ground Lug
* 807-1948 Ty-Wrap
* 807-1359 Mount, Ty-Wrap
* 826-1383 Washer, ¾-inch O.D. x ¼-inch I.D. ZP (Pkg. of 5) (809-0435)
* 809-0582 Washer ½ NPT Locking
*
809-0184 Washer, #10 LK ZP
*
809-0190 Washer, .625 X .275 X 40 Flat SS
*
809-0191 Washer, Lock ¼ Spring ZP
*
809-0193 Washer, Flat ¼ Nylon
*
809-0194 Washer, Flat 5/16 ZP
* 809-0196
Washer, ⅜-inch Flat
* 810-1165
Washer, ⅜-inch Teflon