1-17
Re-assembling A Frypot
(Full-Vat Illustrated)
6
5
4
1
2
7
8
9
1
3
10
11
12
13
14
18
20
19
17
16
15
24
23
21
22
1.10 Troubleshooting and Problem Isolation
Because it is not feasible to attempt to include in this manual every conceivable problem or trouble condition that
might be encountered, this section is intended to provide technicians with a general knowledge of the broad problem
categories associated with this equipment, and the probable causes of each. With this knowledge, the technician
should be able to isolate and correct any problem encountered.
Problems you are likely to encounter can be grouped into six categories:
1. Ignition failure
2. Improper burner function
3. Improper temperature control
4. Controller malfunctions
5. Filtration malfunctions
6. Leakage
The probable causes of each category are discussed in the following sections. A series of Troubleshooting Guides is
also included at the end of the chapter to assist in solving some of the more common problems.
To Next Page
Loading...
