Fuji Xerox ApeosPort-VI C3370 Administrator's Guide

Maintenance
120
Maintenance
3
6 Place at least five sheets of white paper on the Calibration Chart to cover the Chart and
close the document cover.
7 Select [Start].
The message “Calibration in progress. - Copy Job 2” appears and the machine
automatically calibrates the colors. It takes about 10 seconds to complete calibration.
A screen showing the result appears.
8 Select [Confirm].
9 To continue calibration for other screen types, repeat steps 3 to 8.
10 Select [Close] repeatedly until the Services Home screen is displayed.
Note
z
When you configure settings under [System Settings] or [Setup] and then press the <Services Home> button,
the screen directly goes back to the Services Home screen.
11 Copy or print to confirm the image quality.
Note
z
During auto calibration, the machine cannot receive print jobs and faxes.

Fuji Xerox ApeosPort-VI C3370 Specifications

General

Print Resolution	1200 x 2400 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax (optional)
Fax Speed	33.6 kbps
Print Speed	33 ppm (black/color)
Connectivity	Ethernet, USB, Wi-Fi
Memory	4 GB
Paper Input Capacity	1, 140 sheets
Paper Output Capacity	250 sheets
Supported Paper Sizes	A3, A4, A5, B4, B5, Legal, Letter, Executive, Folio, Oficio
Duplex Printing	Yes
PDL	PCL6, PostScript 3
Copy Speed	33 ppm (color/black)