Problem Solving
632
Problem Solving
15
033-329
[Cause] An error occurred during fax transmission.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
033-330
033-331
033-332
033-333
033-334
033-335
033-336
033-338
033-339
033-340
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
033-341
[Cause] An unsupported device is connected instead of Fax Kit 3.
[Remedy] Contact our Customer Support Center.
033-500
033-501
[Cause] An error occurred during fax transmission.
[Remedy] Confirm the recipient, and then execute the operation again. If
receiving, ask the sender to send again.
033-502
[Cause] A response is not received for the fax.
[Remedy] Confirm the recipient, and then execute the operation again.
Also, confirm the recipient's machine (memory is full, machine
is being maintained, or other conditions), and execute the
operation again.
033-503
033-504
[Cause] An error occurred during fax transmission.
[Remedy] Execute the operation again.
033-505
[Cause] An error occurred during fax transmission.
[Remedy] Confirm the recipient, and then execute the operation again. If
receiving, ask the sender to send again.
033-506
[Cause] Communication was terminated at the recipient's machine.
[Remedy] The job may have been canceled at the recipient. If the job was
not canceled, check whether the other machine has a problem,
and execute the operation again.
033-507
[Cause] The recipient's machine cannot receive.
[Remedy] Confirm the recipient's machine (memory is full, machine is
being maintained, or other conditions), and execute the
operation again.
033-508
[Cause] No spooling documents exist at the other machine.
[Remedy] Ask the other party to prepare polling documents, and execute
the operation again.
033-509
[Cause] An error occurred during fax transmission.
[Remedy] Execute the operation again. If the error still is not resolved,
confirm the condition of the other machine.
Error Code
Cause and Remedy