Error Code
633
Problem Solving
15
033-510
[Cause] An error occurred during fax transmission.
[Remedy] Confirm the condition of the line and the other machine, and
execute the operation again.
033-511
[Cause] An error occurred during fax transmission.
[Remedy] Confirm the following conditions:
z
Whether a polling document exists at the other machine
z
Whether a document is jammed at the other machine
z
Whether the passwords match
033-512
[Cause] The other party cannot execute Relay Broadcast.
[Remedy] Confirm whether the other party can execute Relay Broadcast.
033-513
[Cause] The other machine does not have the Folder feature.
[Remedy] Confirm whether the other machine has the Folder feature.
033-514
[Cause] An error occurred during fax transmission.
[Remedy] Ask the sender to send again.
033-516
[Cause] An error occurred during fax transmission.
[Remedy] Confirm the recipient, and then execute the operation again. If
receiving, ask the sender to send again.
033-517
[Cause] An error occurred during fax transmission.
[Remedy] Execute the operation again. If the error still is not resolved,
confirm the condition of the other machine.
033-518
[Cause] The other machine cannot correspond to reception of SUB.
[Remedy] Check whether the other machine can correspond to reception
of SUB, and execute the operation again.
033-519
[Cause] The other machine cannot correspond to reception of SEP.
[Remedy] Check whether the other machine can correspond to reception
of SEP, and execute the operation again.
033-520
[Cause] The other machine cannot correspond to reception of PWD/SID.
[Remedy] Check whether the other machine can correspond to reception
of PWD/SID, and execute the operation again.
033-521
[Cause] An error occurred during fax transmission.
[Remedy] Confirm the condition of the machine (memory is full, paper has
run out, or other conditions), and execute the operation again.
033-522
[Cause] An error occurred during fax transmission.
[Remedy] Ask the sender to execute the operation again.
033-523
[Cause] The line (Channel 1) is not connected correctly.
[Remedy] Confirm the connection of the line (Channel 1) and connect it
correctly, and then execute the operation again. When the
machine is connected to other device such as a home gateway
and a terminal adapter, confirm whether the device works
properly.
Error Code
Cause and Remedy