Error Code
643
Problem Solving
15
"045-001" - "046-999"
"047-001" - "047-999"
043-345
043-346
043-347
043-348
043-349
043-351
043-352
043-353
043-354
043-355
043-356
[Cause] An error occurred in the machine.
[Remedy] Turn the machine off and then on, and then execute the
operation again. If the error still is not resolved, contact our
Customer Support Center.
044-312
044-313
044-314
044-329
044-389
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the error still
is not resolved, contact our Customer Support Center.
Error Code
Cause and Remedy
045-310
045-311
045-359
045-368
045-369
045-370
045-371
045-377
045-382
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
045-396
045-398
045-399
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the error still
is not resolved, contact our Customer Support Center.
Error Code
Cause and Remedy
047-211
047-212
[Cause] An error occurred in the Offset Stacking Unit.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
047-213
[Cause] Detected the installation of a finisher of a different type than
expected.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
Error Code
Cause and Remedy