Problem Solving
644
Problem Solving
15
"055-001" - "058-999"
047-216
[Cause] An error occurred while detecting the finisher.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
047-217
[Cause] An error occurred while detecting Tray 6 (HCF B1) (optional).
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
047-320
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
Error Code
Cause and Remedy
057-310
057-311
057-312
057-313
057-314
057-315
057-316
057-317
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
058-318
058-319
058-320
058-321
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
058-322
058-323
058-324
058-325
058-326
058-327
058-328
058-329
058-330
058-331
058-332
058-333
058-334
058-338
[Cause] An error occurred in the machine.
[Remedy] Turn the machine off and then on, and then execute the
operation again. If the error still is not resolved, contact our
Customer Support Center.
Error Code
Cause and Remedy