EasyManuals Logo

Fuji Xerox ApeosPort-VI C3370 Administrator's Guide

Fuji Xerox ApeosPort-VI C3370
889 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #658 background imageLoading...
Page #658 background image
Problem Solving
658
Problem Solving
15
"118-001" - "122-999"
117-360
[Cause] The value of the year in the Date & Time setting exceeded the
available range.
[Remedy] Turn the machine off and then on. Change the year setting to
the correct value. If the error still is not resolved, contact our
Customer Support Center.
Error Code
Cause and Remedy
118-310
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
118-311
[Cause] An error occurred during software processing.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
121-310
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
121-311
[Cause] An error occurred between the machine and the device
connected.
[Remedy] Once IC Card Reader (optional) is connected to the machine,
the machine automatically changes the [Passcode Entry for
Smart Card Login] setting to [On] under [Tools] >
[Authentication/Security Settings] > [Authentication] >
[Passcode Policy]. Change the setting as required.
121-312
[Cause] An error occurred between the machine and the device
connected.
[Remedy] Switch on the machine power without connecting the device for
EP system, and then set [Login Type] to any option other than
[Login to Remote Accounts] under [Tools] > [Authentication/
Security Settings] > [Authentication].
121-313
[Cause] An error occurred between the machine and the device
connected.
[Remedy] Switch on the machine power without connecting the device for
EP system, and then set [Login Type] to any option other than
[Login to Remote Accounts] under [Tools] > [Authentication/
Security Settings] > [Authentication].
Error Code
Cause and Remedy

Table of Contents

Other manuals for Fuji Xerox ApeosPort-VI C3370

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox ApeosPort-VI C3370 and is the answer not in the manual?

Fuji Xerox ApeosPort-VI C3370 Specifications

General IconGeneral
Print Resolution1200 x 2400 dpi
Copy Resolution600 x 600 dpi
Scan Resolution600 x 600 dpi
FunctionsPrint, Copy, Scan, Fax (optional)
Fax Speed33.6 kbps
Print Speed33 ppm (black/color)
ConnectivityEthernet, USB, Wi-Fi
Memory4 GB
Paper Input Capacity1, 140 sheets
Paper Output Capacity250 sheets
Supported Paper SizesA3, A4, A5, B4, B5, Legal, Letter, Executive, Folio, Oficio
Duplex PrintingYes
PDLPCL6, PostScript 3
Copy Speed33 ppm (color/black)

Related product manuals