EasyManuals Logo

Fuji Xerox ApeosPort-VI C3370 Administrator's Guide

Fuji Xerox ApeosPort-VI C3370
889 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #659 background imageLoading...
Page #659 background image
Error Code
659
Problem Solving
15
121-314
121-316
121-317
121-318
121-319
121-322
121-323
121-324
[Cause] An error occurred between the machine and the device
connected.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
121-325
[Cause] The machine detects unacceptable combination.
The unacceptable combination are as follows:
z
Both the USB IC card reader and the EP related equipment
are used
z
[Login to Local Accounts] is set to [Login Type]
z
[Smart Card or Control Panel Login] is set to [When Smart
Card Reader is Connected]
[Remedy] Take one of the following measures:
z
When both Smart Card and Control Panel Login are not used,
the setting of [When Smart Card Reader is Connected] will be
automatically changed to [Smart Card Login]. No measure is
required.
z
When only the USB IC card reader is connected to the
machine and both Smart Card and Control Panel Login are
used, contact our Customer Support Center.
121-326
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
121-327
[Cause] The machine does not support the connected product.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
121-339
[Cause] An error occurred between the machine and the device
connected.
[Remedy] Check the unit table for CoinKit. If an undefined item is included
in the table, correct the table. Switch off the machine power,
make sure that the touch screen is blank, and then switch on the
machine power. If the error still is not resolved, contact our
Customer Support Center.
121-340
121-350
[Cause] An error occurred between the machine and the device
connected.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
Error Code
Cause and Remedy

Table of Contents

Other manuals for Fuji Xerox ApeosPort-VI C3370

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox ApeosPort-VI C3370 and is the answer not in the manual?

Fuji Xerox ApeosPort-VI C3370 Specifications

General IconGeneral
Print Resolution1200 x 2400 dpi
Copy Resolution600 x 600 dpi
Scan Resolution600 x 600 dpi
FunctionsPrint, Copy, Scan, Fax (optional)
Fax Speed33.6 kbps
Print Speed33 ppm (black/color)
ConnectivityEthernet, USB, Wi-Fi
Memory4 GB
Paper Input Capacity1, 140 sheets
Paper Output Capacity250 sheets
Supported Paper SizesA3, A4, A5, B4, B5, Legal, Letter, Executive, Folio, Oficio
Duplex PrintingYes
PDLPCL6, PostScript 3
Copy Speed33 ppm (color/black)

Related product manuals