Maintenance
100
Maintenance
3
1
Wipe the document cover with a soft cloth moistened with water to remove any dirt, and
then wipe it with a soft, dry cloth.
z
Do not use cleaning agents other than water or neutral detergent.
z
If you cannot remove dirt easily, gently wipe the document cover with a soft cloth moistened with a small
amount of neutral detergent.
2
Wipe the document glass with a soft cloth moistened with water to remove any dirt, and
then wipe it with a soft, dry cloth.
z
Do not use cleaning agents other than water or neutral detergent.
z
If you cannot remove dirt easily, gently wipe the document glass with a soft cloth moistened with a small
amount of neutral detergent.
Cleaning the White Chute and Constant Velocity Transport Glass
If the White Chute or constant velocity transport glass become soiled, smudges may
appear on copies, faxes, or scanned documents and the machine may not properly detect
document sizes.
To ensure clean copies at all times, clean the White Chute and constant velocity transport
glass about once a month.
z
Do not use benzene, paint thinner, or other organic solvents. Doing so might damage paint or coating on
plastic parts.
z
Cleaning the machine with an excessive amount of water may cause the machine to malfunction or damage
documents during copying, faxing, or scanning.
To Next Page
Loading...
Need help?
General
