Fuji Xerox DocuCentre-V C2263 Administrator's Guide

Appendix
696
Appendix
16
Defines a size same as the paper size as the hard clip area. However, the area that allows
actual printing is within the printable area.
The hard clip area can be set either with HP-GL emulation mode settings or by the specified
hard clip command "&I".
The following coordinate values present an example of when the origin is set at the lower
left (Auto Layout in HP-GL/2) of A3 sheet.
Standard
Defines the printable area of the machine as the hard clip area.
Printable Area
The printable area in the HP-GL mode is as follows:
Paper Hard Clip Area
Standard Hard Clip Area
Paper Size
(16442, 11520)
(16798, 11876)
(0, 0) Standard origin
(0, 0) Paper origin
+Y
+X

Fuji Xerox DocuCentre-V C2263 Specifications

General

Print Resolution	1200 x 2400 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax
Memory (Standard)	1GB
Duplex Printing	Yes
Fax Transmission Speed	33.6 kbps
Supported Operating Systems	Windows, Mac OS, Linux
Connectivity	USB 2.0, Ethernet
Paper Size	A4, A5, B5
Hard Disk Drive	160 GB