Fuji Xerox DocuCentre-V C2263 Administrator's Guide

Configuration of Encryption using IPsec
415
Encryption and Digital Signature Settings
13
When a passcode is required, select [Next] and enter the system administrator’s passcode,
and select [Enter].
Note
z
The default user ID is "11111".
z
The default passcode is "x-admin".
3 Select [Tools] on the Services Home screen.
4 Select [Connectivity & Network Setup].
5 Select [Security Settings].
6 Select [IPsec Settings].
7 Configure the required settings.
Reference
z
For details on the settings, refer to "IPsec Settings" (P.223).
8 Select [Close].
Step3 Configuration on the Computer
The following describes the configuration procedures on the computer.
Configure the following settings on the computer.
z
Create an IP security policy
z
Assign the IP security policy
Reference
z
For details on the settings, refer to the help of the computer.

Fuji Xerox DocuCentre-V C2263 Specifications

General

Print Resolution	1200 x 2400 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax
Memory (Standard)	1GB
Duplex Printing	Yes
Fax Transmission Speed	33.6 kbps
Supported Operating Systems	Windows, Mac OS, Linux
Connectivity	USB 2.0, Ethernet
Paper Size	A4, A5, B5
Hard Disk Drive	160 GB