EasyManua.ls Logo

Fuji Xerox DocuCentre-V C2263

Fuji Xerox DocuCentre-V C2263
771 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Tools
184
Tools
5
Paper Supply
Set the default value for [Paper Supply] in the [Copy] screen.
Note
z
When the default value of [Reduce/Enlarge] is set to [Auto %], [Auto Select] cannot be selected for [Paper
Supply].
Reduce/Enlarge
Set the default value for [Reduce/Enlarge] in the [Copy] screen.Select the ratio from
[100%], [Auto %], and the buttons registered as Reduce/Enlarge Preset buttons.
Note
z
When the default value of [Paper Supply] is set to [Auto Select], [Auto %] cannot be selected for [Reduce/
Enlarge].
Reference
z
For information on the Reduce/Enlarge Preset buttons, refer to "Reduce/Enlarge Presets" (P.192)".
Output Color
Set the default value for [Output Color] in the [Copy] screen.When [No Default] is selected,
select the output color in the [Copy] screen before making copies.
Output Color (Simple Copy)
Set the default value for [Output Color] in the [Simple Copy] screen. You can select from
[Auto], [Color], and [Black & White].
Single Color
Set the default value for [Single Color] in [More...] of [Output Color] in the [Copy] screen.
You can select a color from six preset colors and six custom colors.
Reference
z
For information about custom colors, refer to "Custom Colors" (P.193).
Dual Color - Source Color
Set the default value for [Source Color] that appears when [Dual Color] is selected for
[More...] of [Output Color] in the [Copy] screen.Selecting [Color] enables you to select a
color from six colors.
Dual Color - Target Area Color
Set the default value for [Target Area Color] that appears when [Dual Color] is selected for
[More...] of [Output Color] in the [Copy] screen. You can select a color from seven preset
colors and six custom colors.
Reference
z
For information about custom colors, refer to "Custom Colors" (P.193).
Dual Color - Non-target Area Color
Set the default value for [Non-target Area Color] that appears when [Dual Color] is selected
for [More...] of [Output Color] in the [Copy] screen. You can select a color from seven preset
colors and six custom colors.
Reference
z
For information about custom colors, refer to "Custom Colors" (P.193).

Table of Contents

Other manuals for Fuji Xerox DocuCentre-V C2263

Related product manuals