Tools
220
Tools
5
îš„ SMB Server Setup
Select the server specification method from [By Domain Name] and [By Domain & Server
Names/IP Address].
According to the option you selected here, set [Domain Name] and [Server Name/IP
Address] for SMB servers 1 to 5 respectively.
The setting for SMB server 1 is used as the default setting for authentication.
îš„ Domain Name
Enter the domain name of the server. Up to 64 characters are allowed.
This setting is mandatory regardless of the SMB server specification method selected for
[SMB Server Setup].
z
Use the NetBIOS or Active Directory domain name for the domain name.
îš„ Server Name/IP Address
Enter the server name or IP address.
This setting is valid when [SMB Server Setup] is set to [By Domain & Server Names/IP
Address].
z
Use the NetBIOS computer name or full computer name with DNS suffix for the server name.
z
For IPv4, enter the address in the format "xxx.xxx.xxx.xxx", where "xxx" is a numeric value from 0 to 255.
Security Settings
Set the security settings.
SSL/TLS Settings
Configure the SSL/TLS settings to encrypt the communication between the server or the
client computer and the machine. Enabling SSL/TLS protects the communication from an
unauthorized access and prevents information leakage or data falsification.
îš„ Device Certificate - Server
Select a certificate for HTTP SSL/TLS communications.
îš„ HTTP - SSL/TLS Communication
Select whether or not to enable HTTP SSL/TLS communications.
îš„ HTTP - SSL/TLS Port Number
Set the port number used for HTTP SSL/TLS communication from 1 to 65535.
The default value is 443.
To Next Page
Loading...
Need help?
General
