z
If you change the [LPD Print Queue] setting, the [Receiving Buffer - LPD] setting may automatically be
changed. For more information on Receiving Buffer - LPD Spool, refer to "Receiving Buffer - LPD" (P.228).
îš„ Data Processing Order
Prints jobs in the order of becoming print-ready status after receiving the jobs.
If you instruct the machine to print jobs of multiple documents continuously, the machine
may preferentially print a job which was sent later depending on the time for data
processing.
îš„ Job Submission Order
Prints jobs in the order of lpr print submission.
z
This setting is valid only when [Receiving Buffer - LPD] is set to [Spool to Hard Disk]. When any other setting,
printing is performed in [Data Processing Order].
OCR Font Glyphs (0 x 5C)
Allows you to select [Backslash] or [Japanese Yen Sign] to print 0x5C character when the
OCR fonts are used.
To Next Page
Loading...
