Tools
154
Tools
5
The language set here is the standard language that is retained even when the machine
is powered off and on.
z
Setting in the local users mode
The language setting in [Language] in the Services Home screen is lost when the
machine is powered off.
z
When [English] is selected, only ASCII characters can be used.
z
When you set [Language] to [English] on the Services Home screen and an address book entry or contents of
[Details] of Job Flow Sheets is entered in double-byte characters, the characters may not be displayed
properly.
z
When you use CentreWare Internet Services to import a CSV file* including double-byte characters other than
a selected language, the characters in the file may be garbled or the import may fail.
*: CSV (Comma Separated Values) is a file format that is often used for saving data by spreadsheets and
database programs.
Screen Brightness
You can adjust the screen brightness of the control panel between -16 and +16.
Reconfirm E-mail Recipient
Select whether or not to display the screen to confirm e-mail recipients when sending e-
mails.
Select from [Confirmation Not Required], [Always Reconfirm Recipient], and [Reconfirm if
Multiple Recipients].
Reconfirm Fax/Internet Fax Recipient
îš„ First Tab - Reconfirm Recipients
Select from [Off], [Always Reconfirm Recipient], and [Reconfirm if Multiple Recipients].
îš„ Start Job at Other Tabs
Select from [Disabled] and [Enabled].
z
When you select [Start Disabled], you cannot confirm the e-mail recipients in other Tabs.
îš„ Reconfirm Recipient at Other Tabs
Select from [Off], [Always Reconfirm Recipient], and [Reconfirm if Multiple Recipients].
z
This item is not displayed when you select [Disabled] for [Start Job at Other Tabs].
z
[Off] cannot be selected when you select [Reconfirm if Multiple Recipients] for [First Tab - Reconfirm
Recipients]. And [Off] and [Reconfirm if Multiple Recipients] cannot be selected when you select [Always
Reconfirm Recipient] for [First Tab - Reconfirm Recipients].
Reconfirm E-mail Recipient Button
Set whether or not to display a screen to check available memory when sending e-mails.
Select from [Disabled (Show Memory)] and [Enabled].
To Next Page
Loading...
Need help?
General
