Scanner Environment Settings
364
Scanner Environment Settings
9
Configuration of Scan to PC
This section describes how to configure the machine to use the Scan to PC service.
The following shows the reference section for each procedure.
"Step 1 Preparations" (P.364)
"Step 2 Enabling Port and Setting up TCP/IP" (P.365)
"Step 3 Configuration on the Computer" (P.366)
Step 1 Preparations
The following items are required to use the Scan to PC feature.
Using FTP
To transfer data via FTP, one of the following FTP servers and an account to the FTP server
(login name and password) are required.
z
Microsoft Windows Server 2003, Microsoft Windows Server 2008, Microsoft Windows
Server 2008 R2, Microsoft Windows Server 2012, Microsoft Windows Server 2012 R2,
Microsoft Windows Vista, Microsoft Windows 7, Microsoft Windows 8, or Microsoft
Windows 8.1
FTP service of Microsoft Internet Information Server 6.0
z
Microsoft Windows 2000 Server, or Microsoft Windows 2000 Professional
FTP service of Microsoft Internet Information Server 3.0 or later
z
Mac OS X
FTP service of Mac OS X 10.5/10.6, Mac OS X 10.7 Lion, OS X 10.8 Mountain Lion, OS X
10.9 Mavericks, and OS X 10.10 Yosemite
z
For information on how to configure the FTP service, refer to the manual provided with the software. For information on how to
configure the settings on Mac OS X 10.7 Lion, OS X 10.8 Mountain Lion, OS X 10.9 Mavericks, and OS X 10.10 Yosemite, consult the
official website of Apple Inc.
Using SMB
To transfer data via SMB, your computer must run on one of the following operating
systems that includes folder sharing.
For Mac OS X, a shared user account is required on the Mac OS X.
z
Microsoft Windows Server 2003
z
Microsoft Windows Server 2008
z
Microsoft Windows Server 2008 R2
z
Microsoft Windows Server 2012
z
Microsoft Windows Server 2012 R2
z
Microsoft Windows Vista
z
Microsoft Windows 7
z
Microsoft Windows 8
z
Microsoft Windows 8.1
To Next Page
Loading...
Need help?
General
