Fuji Xerox DocuCentre-V C2263 Administrator's Guide

Tools
176
Tools
5
tray, the next set is delivered to the rear of the tray. Set the offset function for the Center
Tray - Lower.
Select from [No Offset], [Offset per Set], and [Offset per Job]. When [Offset per Set] or
[Offset per Job] is selected, the machine slightly shifts the output position per set or per job
(print job) respectively.
Offset Stacking (Center Tray - Lower)
Offsetting means that each set of copies is delivered to the center tray and shifted slightly
to separate it from the previous job. When a set of copies is delivered to the front of the
tray, the next set is delivered to the rear of the tray. Set the offset function for the Center
Tray - Lower.
Select from [No Offset], [Offset per Set], and [Offset per Job]. When [Offset per Set] or
[Offset per Job] is selected, the machine slightly shifts the output position per set or per job
(print job) respectively.
Offset Stacking (Right Middle Tray)
Offsetting means that each set of copies is delivered to the finisher tray and shifted slightly
to separate it from the previous job. When a set of copies is delivered to the front of the
tray, the next set is delivered to the rear of the tray. Set the offset function for the Right
Middle Tray.
Select from [No Offset], [Offset per Set], and [Offset per Job]. When [Offset per Set] or
[Offset per Job] is selected, the machine slightly shifts the output position per set or per job
(print job) respectively.
Note
z
This feature may not be available depending on the model or your machine configuration. For more
information, contact out Customer Support Center.
Booklet Offset
When [Offset Stacking (Center Tray)] or [Offset Stacking (Right Middle Tray)] is set to
[Offset per Set], the paper is output to the tray by being slightly displaced by set. If,
however, [Fold & Staple] is selected for booklet settings, the paper is not output by set.
Note
z
This feature does not appear for some models. An optional component is required. For more information,
contact our Customer Support Center.
Extra Center Tray
Allows you to select whether or not to use the Extra Center Tray. Select from [Not Installed]
and [Installed].

Fuji Xerox DocuCentre-V C2263 Specifications

General

Print Resolution	1200 x 2400 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax
Memory (Standard)	1GB
Duplex Printing	Yes
Fax Transmission Speed	33.6 kbps
Supported Operating Systems	Windows, Mac OS, Linux
Connectivity	USB 2.0, Ethernet
Paper Size	A4, A5, B5
Hard Disk Drive	160 GB