Fuji Xerox DocuCentre-V C2263 Administrator's Guide

Common Service Settings
147
Tools
5
2 Select a date format.
3 Specify [Year], [Month], and [Day].
4 Select [Save].
Time
Set the time in the system clock of the machine, using 12-hour or 24-hour format.
The time set here will be printed on all lists and reports.
1 Select [Time], and then select [Change Settings].
2 Select the time format.
3 When you select [12 Hour Clock], set [AM] or [PM].
4 Specify [Hours] and [Minutes].
5 Select [Save].
NTP Time Synchronization
You can synchronize the machine clock with a time server (NTP: Network Time Protocol),
receiving time information from the server.
To connect to a time server, select [On] for [NTP Time Synchronization], and set the IP
address of the time server in [Time Server Address].
Connection Interval
Select the time interval to connect to the time server.
You can select from 1 to 500 hours in 1 hour increments.

Fuji Xerox DocuCentre-V C2263 Specifications

General

Print Resolution	1200 x 2400 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax
Memory (Standard)	1GB
Duplex Printing	Yes
Fax Transmission Speed	33.6 kbps
Supported Operating Systems	Windows, Mac OS, Linux
Connectivity	USB 2.0, Ethernet
Paper Size	A4, A5, B5
Hard Disk Drive	160 GB